Blog
Read practical articles on magnetic materials, coating choices, pull-force validation, separator design and traceable industrial supply.
Can an Eclipse Magnetics sheet lifter handle thin metal? Learn when magnetic lifting beats clamps for ferrous sheet, and where it hits hard limits.
Continue ReadingLearn how to choose a thin sheet lifter magnet for steel and aluminum. Compare contact spread, per-pole force, and temper to lift 0.2–6.0 mm sheet without bending it.
Continue ReadingChoose an Eclipse Magnetics thin sheet lifting magnet by matching rated capacity to sheet weight and gauge, adding a safety margin for controlled release.
Continue ReadingLearn why a custom aluminum heatsink pricelist is quote-driven, what drives cost, and how to compare quotes with RFQ tools and certifications.
Continue ReadingNucor assessment test answers aren't about memorizing product names. Learn how Aeos, Econiq, and Invincia map to real projects and turn test prep into buying judgment.
Continue ReadingNucor is the largest US steel producer. This guide explains its recycling-led model, product families, and a decision rule for choosing Aeos, Econiq, Elcyon, or Invincia.
Continue ReadingStainless and carbon steel can coexist safely when grade, environment, and contact design are weighed. Use a conditional rule, not a blanket ban.
Continue ReadingMild dish soap and water is the best cleaner for stainless steel sinks. Learn why chlorine and abrasives pit 304, while 316L tolerates chloride exposure.
Continue ReadingLearn how to choose architectural metals by matching mechanical load, environment, and fabrication method. Practical guide to aluminum, brass, and bronze selection.
Continue ReadingStop choosing by N52 alone. Diameter, thickness, coating, and supplier reliability decide whether a neodymium disc magnet actually works. Here's a 60-second rule.
Continue Reading