Blog
Read practical articles on magnetic materials, coating choices, pull-force validation, separator design and traceable industrial supply.
For coastal Mobile, AL, 316 stainless steel outperforms 304 and aluminum in chloride-laden air. See the pitting thresholds, the cost payback, and the alloy selection rule.
Continue ReadingFor wood-stud drywall, a magnetic finder beats an electronic one; only non-ferrous metal studs require electronic. Engineer's verdict inside.
Continue ReadingChoosing a super neodymium disc magnet isn't about picking the strongest pull. Learn how application, grade, coating, and safety should drive your decision.
Continue ReadingStop choosing a thin-sheet magnetic lifter by pull force alone. Learn how pole-face geometry and magnetic-circuit depth protect 1mm ferrous sheet from bending.
Continue ReadingLearn why a 500kg magnet fails on 1mm steel, how aluminum and brass rule out magnetics, and the field-spacing fix that keeps thin sheets flat.
Continue ReadingWhy a thin-sheet lifter magnet drops aluminum but lifts steel, how face area and safe working load prevent buckling, and how to size yours.
Continue ReadingChoose the right thin-sheet magnetic lifter by footprint and pole spacing, not just rated capacity, to lift 1 mm steel blanks flat and without creases.
Continue ReadingLearn how to match an Eclipse Magnetics lifting magnet to thin steel sheet. Compare thickness, surface, and safety factor to avoid bending and slipping.
Continue ReadingA magnetic stud finder locates the screws, not the stud, making it the most reliable first tool on standard drywall. Learn the edge-tracing routine and when to trust it.
Continue ReadingStop comparing only N-numbers. A super neodymium disc magnet's real grip depends on grade, coating, thickness, and environment. Here's a decision framework.
Continue Reading